.bp
.ss
.nf
BATCH -------------------------

.ni 10
.n2 1
batch: already active
batch: working directory unattainable
batch: can't access batch directory
batch: checkpoint error
batch: process exec failed
batch: can't exec monitor
batch: .checkpoint can't open
batch: /dev/cyb.cmdsu can't open
batch: /dev/cyb.jobsu can't open
batch: /dev/cyb.jobsd can't open
batch: /dev/cyb.cmdsd can't open
batch: /dev/cr0 can't open
batch: .rawstatistics can't open
batch: encoded-filename can't remove
.sp 2
.n2 1
batch is already running, and you cant start it twice.
batch cannot chdir to /spool/batch/.work. call a guru.
batch cant read the directory once it is there. call a guru.
batch tried to do a checkpoint but could'nt. call a guru.
in starting the rest of the system part of it (process) refused to start. call a guru.
in trying to start the overseeing process - trouble. call a guru.
batch wants to open the checkpoint file but cant. call a guru.
batch wants to talk to the cyber but cant. call a guru.
batch wants to talk to the cyber but cant. call a guru.
batch wants to listen to the cyber but cant. call a guru.
batch wants to listen to the cyber but cant. call a guru.
batch wants to listen to the card reader but cant. has someone else got it?
batch wants to use the stats file but cant. call a guru.
batch wants to clean up after a warm start - no can do.
.n2 0

CANCEL ------------------------

.n2 1
cancel: args ??
.sp 2
.n2 1
cancel requires an arg - cr or lp ?
.n2 0

CRD ---------------------------

.n2 1
crd: file create error
.sp 2
.n2 1
crd wishes to spool a job but cant get a file to put it in. call a guru.
.n2 0

.bp
DQ ----------------------------

.n2 1
dq: checkpoint file ??
.sp 2
.n2 1
dq wants to look at the checkpoint file but cant. call a guru.
.n2 0

JTD ---------------------------

.n2 1
jtd: file open error
.sp 2
.n2 1
jtd wishes to send a spooled file to the cyber but cant. call a guru.
.n2 0

MAC ---------------------------

.n2 1
mac: /bin/macro can't exec
mac: /bin/linkr can't exec
mac: can't exec output of linkr
mac: .sdump can't exec
.sp 2
.n2 1
mac cant find the macro assembler. who stole it? call a guru.
mac cant find the linkr. who stole it? call a guru.
mac wants to run your job but the linkr output does not. call a guru.
mac cant even get a dump of the failure. call a guru.
.n2 0

SPL ---------------------------

.n2 1
spl: file create error
spl: format error??
.sp 2
.n2 1
spl cant open a file to spool into. call a guru.
spl cant understand the sequence of data from the cyber.
.n2 0

SUBMIT ------------------------

.n2 1
submit: ####  illegal job card 
submit: usage:  submit file
submit: file not found
submit: file lines too long
.sp 2
.n2 1
submit checks jobcards. this one is rs.
submit even tells you how to use it.
submit cant find the file you gave it. twit?
submit one of the file lines is > 80 columns. tuff.
.n2 0

.bp
A -----------------------------

.n2 1
a: open fail
a: message too long
a: previous command not sent
.sp 2
.n2 1
the command cant open the cyber command file.
the command to the cyber is too long.
the last command to the cyber has not gone yet. is the cyber dead?
.n2 0

B -----------------------------

.n2 1
b: open fail
b: message too long
b: previous command not sent
.n2 0
.sp 2
		as for the a command !!

C -----------------------------

.n2 1
c: open fail
c: message too long
c: previous command not sent
.n2 0
.sp 2
		as for the a command !!

D -----------------------------

.n2 1
d: open fail
d: message too long
d: previous command not sent
.n2 0
.sp 2
		as for the a command !!

E -----------------------------

.n2 1
e: open fail
e: message too long
e: previous command not sent
.n2 0
.sp 2
		as for the a command !!

.bp
F -----------------------------

.n2 1
f: open fail
f: message too long
f: previous command not sent
.n2 0
.sp 2
		as for the a command !!

G -----------------------------

.n2 1
g: open fail
g: message too long
g: previous command not sent
.n2 0
.sp 2
		as for the a command !!

I -----------------------------

.n2 1
i: open fail
i: message too long
i: previous command not sent
.n2 0
.sp 2
		as for the a command !!

L -----------------------------

.n2 1
l: open fail
l: message too long
l: previous command not sent
.n2 0
.sp 2
		as for the a command !!

M -----------------------------

.n2 1
m: open fail
m: message too long
m: previous command not sent
.n2 0
.sp 2
		as for the a command !!

.bp
N -----------------------------

.n2 1
n: open fail
n: message too long
n: previous command not sent
.n2 0
.sp 2
		as for the a command !!

Q,B ---------------------------

.n2 1
q,b: open fail
q,b: message too long
q,b: previous command not sent
.n2 0
.sp 2
		as for the a command !!

Q,I ---------------------------

.n2 1
q,i: open fail
q,i: message too long
q,i: previous command not sent
.n2 0
.sp 2
		as for the a command !!

Q,O ---------------------------

.n2 1
q,o: open fail
q,o: message too long
q,o: previous command not sent
.n2 0
.sp 2
		as for the a command !!

Q,R ---------------------------

.n2 1
q,r: open fail
q,r: message too long
q,r: previous command not sent
.n2 0
.sp 2
		as for the a command !!

.bp
Q,E ---------------------------

.n2 1
q,e: open fail
q,e: message too long
q,e: previous command not sent
.n2 0
.sp 2
		as for the a command !!

Q,I,A -------------------------

.n2 1
q,i,a: open fail
q,i,a: message too long
q,i,a: previous command not sent
.n2 0
.sp 2
		as for the a command !!

Q,O,A -------------------------

.n2 1
q,o,a: open fail
q,o,a: message too long
q,o,a: previous command not sent
.n2 0
.sp 2
		as for the a command !!

Q,R,A -------------------------

.n2 1
q,r,a: open fail
q,r,a: message too long
q,r,a: previous command not sent
.n2 0
.sp 2
		as for the a command !!

R -----------------------------

.n2 1
r: open fail
r: message too long
r: previous command not sent
.n2 0
.sp 2
		as for the a command !!

.bp
S -----------------------------

.n2 1
s: open fail
s: message too long
s: previous command not sent
.n2 0
.sp 2
		as for the a command !!

U -----------------------------

.n2 1
u: open fail
u: message too long
u: previous command not sent
.n2 0
.sp 2
		as for the a command !!

TEXT1 -------------------------

.n2 1
unlink: error
checkpoint: write error
.sp 2
.n2 1
the unlink routine used by all processes cant. call a guru.
the checkpoint routine used by all processes is in error. call a guru.
.n2 0

RESTART -----------------------

.n2 1
restart: args ??
.sp 2
.n2 1
restart may have args of "lp" or nothing.
.n2 0

.ni 0
.ds
.fi
